Acurite Alarm Clock How To Set

                ACURITE Alarm Clock Instruction Transmission

Give thanks You for purchasing this ACURITE® production. This alarm clock features indoor and outdoor temperature, a calendar and a clock which instantly sets itself once batteries are installed. Please read this transmission in information technology's entirety to fully enjoy the benefits and features of this product. Please keep this manual for hereafter reference.

NOTE: A articulate film is applied to the LCD at the factory that must be removed prior to using this product. Locate the clear tab and merely pare to remove.

OVERVIEW OF FEATURES

About lntelli-Time®

Your new alarm clock is equipped with lntelli-Time technology which is pre-programmed with the correct time and date. lntellitime instructs the clock to self gear up itself once batteries are installed. The lntelli-Time feature requires an internal backup bombardment to operate correctly. This battery is located below the AA battery compartment and is pre-installed at the factory. We propose replacement of the backup battery every 5 years. We recommend the replacement of the fill-in battery in 1-2 years if the unit is not powered on for a long period of fourth dimension.

INSTALL BATTERIES

Installing Batteries

Notation: Install all batteries in both units within a vi minute period to ensure proper wireless functionality. Notation: Practice not use rechargeable or heavy duty batteries.

A. Wireless Sensor Always install batteries into the wireless sensor Starting time to ensure proper wireless synchronization with the warning clock.

Remove the iv battery compartment screws.
Remove the bombardment compartment cover and install 2 fresh "'AA" batteries equally shown here.

B. Alarm Clock
Remove the battery compartment embrace and install three fresh "AA" batteries as shown.

Operating Range of Batteries
Extended periods of cold temperatures ( beneath -4°F / -20°c ) can cause alkaline batteries to function improperly. This will cause the outdoor wireless sensor to cease transmitting temperature readings. Employ lithium batteries in these low temperature conditions to ensure continued operation for wireless sensors placed outdoors.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN Accordance WITH YOUR LOCAL LAWS AND REGULATIONS.
Battery SAFETY: Follow the polarity(+/·) diagram in the bombardment compartment. Promptly expressionless batteries from the device. Dispose of used batteries Only batteries or equivalent are to exist used. incinerate used properly. of the same blazon as recommended DO Not batteries. DONOT dispose of batteries in fire, as batteries may explode or leak. Do NOT mix one-time and new batteries or types of batteries (alkaline/standard). DO Not use rechargeable DO NOT batteries. brusque-excursion the supply terminals.

SETUP

Basic Clock Setup

Later installing batteries, the alarm clock will set itself to the proper time and date. Eastern Standard Time (EST] is the preset default timezone. If you alive in a different fourth dimension zone, y'all will need to select your fourth dimension zone for the clock to display your correct time. This procedure is outlined below.

Some other preference which may demand to be prepare depending on your location is Daylight Saving Time (DST]. Certain areas do not observe DST, and y'all may need to disable the DST setting (OFF].

The following outlines the setup procedure as it relates to timezone and DST settings:

Push button the "time set" button, the currently selected timezone will flash.
Button the "Down or Up arrow" buttons to cycle through and select your time zone.
Push button the "fourth dimension set" push button again to confirm your timezone pick and move on to select your Daylight Saving Fourth dimension (DST] preference.
Push the "Down or Up arrow" buttons to bike through and select your DST preference.
Push button the "time prepare" button once more to confirm your DST preference and exit setup.

Custom Time Setting

If you lot wish to gear up the clock slightly ahead or slightly behind, or if the lntelli-Fourth dimension internal memory battery is immune to go dead, you may set up the fourth dimension and date simply past following the the custom setup procedure below:

Printing AND Agree the "time set" push for 3 seconds, the HOUR will blink.
Button the "Downwardly or Up arrow" buttons to conform the HOUR.
Push the "time set" button again to confirm your selection and movement on to setting the MINUTES.
Push button the "Down or Upwards arrow" buttons to adjust the MINUTES.
Push the "fourth dimension set" push again to confirm your fourth dimension setting and move on to setting the calendar.
Fix the Year, Twenty-four hour period, Month and Appointment in the aforementioned manner the time was set.
Push the "time gear up" button to leave custom time setting mode.

Performance

Alarm Clock Setting

To gear up the warning time, press AND Concur the "alarm set" button for iii seconds to enter into alarm time prepare way. The hour volition wink.
Push the "Downward or Up Arrow" A buttons to accommodate the hour, note the AM and PM indicators.
Push the "alarm set" button to ostend hour selection and move on.
Button the "Downwards or Upwards Pointer" buttons to accommodate the minutes.
Button the "warning ready" button to confirm and exit warning fourth dimension set fashion.

Warning Clock ON or OFF

To turn alarm on or off, push the "Alarm on/off" button.

Alert ON INDICATION: The display will indicate "alert on·· and a bell icon will evidence side by side to the electric current time when the alert is set up to "ON."

ALARM OFF INDICATION: The display will bespeak "alarm off" and a bong icon will NOT be present next to the electric current time when the alarm is set to "OFF."

WHEN ALARM IS SOUNDING: Press the "alarm on/off" button to turn the alarm off.

Alarm Clock SNOOZE office

When the alert is sounding, you may activate the 8 minute SNOOZE function by firmly pressing down on the backlight/snooze expanse at the summit of the warning clock. The SNOOZE office may be activated up to 10 times. Notation that the activation switches for the snooze/backlight part are located on the bottom of the alarm clock. Make certain the alert clock is on a stable apartment surface for proper operation.

Backlight

You may activate the backlight for five seconds at any time past firmly pressing downwardly on the backlight/snooze surface area at the top of the alarm clock. NOTE that the activation switches for the snooze/backlight function are located on the bottom of the warning clock. Brand sure the alarm clock is on a stable flat surface for proper operation.

°F/°C Temperature Display

You may select °For °C temperature display past pressing the Up button during normal functioning [non in any setup model.

Low Battery Indicator

When the low battery indicator appears to the correct of the current time area, the batteries will demand replacement soon. follow the battery installation procedure outlined in this manual exactly to ensure proper operation.

Wireless Reception

The main unit has a wireless signal reception icon in the outdoor temperature display area. If there are a depression number of "bars" present, yous
may feel no temperature display ["–"] or inaccuracy. In either case, you may need to relocate one or both of the units. If most or all 4 of the bars are nowadays, wireless reception is good and no activity is required.

PLACEMENT

Now that setup is complete, you lot must choose a location to identify the wireless sensor and the alarm clock. The wireless sensor MUST be placed less than 100 feet away from the alarm clock for the wireless temperature to function properly.

This wireless thermometer uses radio frequency for advice, which is susceptible to interference from other electronic devices and large metal items or thick walls. Ever place both units at least 3 anxiety away from appliances I TV, microwave, radios, etc.] or objects I large metal surfaces, thick rock walls, etc. I that may interfere with the wireless communication.

Placement of Warning Clock
Place the alarm clock in a dry out area free of dirt and dust. To help ensure an authentic indoor temperature measurement, be sure to place the primary unit out of directly sunlight, and away from any heat sources or vents in your dwelling house.

Placement of Sensor
The wireless sensor MUST BE PLACED OUTDOORSto observe outdoor temperatures and relay the outdoor temperature to the main unit display. The wireless sensor must be placed less than 100 feet from the main unit of measurement. The wireless sensor is water resistant and is designed for outdoor use. Yet, to extend the life of the production, place the wireless sensor in an expanse protected from direct weather elements. To ensure an accurate outdoor temperature measurement, be certain the wireless sensor is placed out of direct sunlight and away from whatever heat sources.

Troubleshooting

Set Wireless ID
This wireless thermometer uses long range 433mhz radio frequency for communication.

In the issue that you have reception problems due to interference, both the alert clock and the wireless sensor have a selectable wireless ID. The ID switches are located inside the bombardment compartments of the alert clock and the wireless sensor.

You may cull A, B or C; but both the alarm clocks' and the wireless sensors' IDs must match for successful synchronization.

PRODUCT SPECIFICATIONS

Measurement Ranges

Temperature
Main Unit of measurement: 32°F to 122°F / o°C to 50°C
Wireless Sensor: -40°F to 158°F / -40°C to 70°C

Specifications

Ability Requirements
Principal Unit of measurement: three ten ""AA" alkaline or lithium batteries [not included)
Wireless Sensor: 2 x ""AA" alkaline or lithium batteries [not included)

Wireless Advice
Rdio Frequency: 433 mhz
Manual Intervals: every 16 seconds

Please DO NOT return production to the retail shop.
For technical aid and production render information, please telephone call Customer Care: 877-221-1252 Monday. – Friday. 8:00 A.Thou. to 4:45 P.Thousand. [CST]
www.chaneyinstrument.com

Express ONE Year WARRANTY

Chaney Instrument Visitor warrants that all products it manufactures to be of skillful fabric and workmanship and to be free of defects if properly installed and operated for a menstruum of 1 year from appointment of purchase. REMEOY FOR Alienation OF THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Whatever product which, nether normal use and service, is proven to alienation the warranty contained herein inside I YEAR from date of auction will, upon examination past Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned appurtenances shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall take received normal habiliment and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

THE Higher up-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, Express OR IMPLIED, AND ALL OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE Implied WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF Fettle FOR A Particular PURPOSE. CHANEY EXPRESSLY DISCLAIMS ALL LIBILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL Damages, WHETHER ARISING IN TORT OR BY CONTRACT FROM ANY Breach OF THIS WARRANTY. SOME STATES Exercise NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, And so THE ABOVE LIMITATION OR EXCLUSION MAY Non Utilize TO YOU. CHANEY Further DISCLAIMS ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED Past LAW. By Credence OF Whatsoever OF CHANEY'S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES ARISING FROM THEIR Apply OR MISUSE. NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY Whatever OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO Modify OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY Also Have OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

For in-warranty repair, please contact:
Customer Care Department
Chaney Musical instrument Company
965 Wells Street
Lake Geneva, WI 53147

Chaney Customer Care
877-221-1252
Mon-Fri 8:00 a.grand. to 4:45 p.k. CST
www.chaneyinstrument.com

This device complies with function 15 of the FCC rules. Operation is subject to the following ii conditions:
1- This device may Not cause harmful interference, and
2- This device must accept whatsoever interference received, including interference that may cause undesired operation.

Notation: This equipment has been tested and institute to comply with the limits for a Class B digital dvice, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency free energy and, if not installed and used in accordance with the instructions, may crusade harmful interference to radio communications. Even so, In that location is no guarantee that interference will not occur in a particular installation. If this equipment does crusade harmful interference to radio or tv set reception, which can be determined past turning the equipment off and on, the user is encouraged to endeavour to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Cornet the equipment into an outlet on a circuit different from that to which the receiver Is connected.
Consult the dealer or an experienced radio/TV technician for help.

Note: The manufacturer is non responsible for any radio or Telly interference acquired by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Ezoic